Lexus LS460 User Manual page 712

Hide thumbs Also See for LS460:

Table of Contents

Press and hold the vehicle' s programmed HomeLink

seconds and release it. Repeat this step once again. The garage door

If the garage door opens, the programming process is complete. If the door

does not open, press and release the button a third time. This third press

and release will complete the programming process by opening the

garage door.

The ceiling mounted garage door opener motor should now recognize the

signal and operate the garage door.

Repeat the steps above to program another rolling code system for

any of the remaining HomeLink

Programming an entry gate (for U.S.A. owners)/Programming all

devices in the Canadian market

Place your transmitter 1 to 3 in. (25 to 75 mm) away from the surface

of the HomeLink

Keep the HomeLink

Press and hold the selected HomeLink

Repeatedly press and release (cycle) the device' s remote control

button for two seconds each until step 4 is completed.

When the indicator light on the HomeLink

starts to flash rapidly, release the buttons.

Test the operation of the HomeLink

grammed button. Check to see if the gate/device operates correctly.

Repeat the steps above to program another device for each of the

remaining HomeLink

Programming other devices

To program other devices such as home security systems, home door

locks or lighting, contact your Lexus dealer for assistance.

Reprogramming a button

The individual HomeLink

grammed. To reprogram a button, follow the "Reprogramming a

button" instructions.

5-9. Other interior features

indicator light in view while programming.

buttons cannot be erased but can be repro-

compatible transceiver

by pressing the newly pro-

button for 2