Lexus LS460 User Manual page 173

Linked mirror function when reversing
When the mirror select switch is in the "L" or "R" position, the outside
●
rear view mirrors will automatically angle downwards when the vehicle
is reversing in order to give a better view of the ground. To disable this
function, move the mirror select switch to the neutral position (between
"L" and "R").
If the mirror angle adjustment switch is operated while the linked mirror
●
function is in operation, the angle and position of the mirrors can be
remembered, and the mirrors will operate at the angle adjusted to the
last time the linked mirror function was operated.
However, because the mirrors move based on the angle they are in
when the linked mirror function is not operating, the mirror angle when
the linked mirror function is operating will also be changed if the mir-
rors are adjusted while the function is not operating.
Mirror angle can be adjusted when
■
The engine switch is in ACCESSORY or IGNITION ON mode.
When the mirrors are fogged up
■
The outside rear view mirrors can be cleared using the mirror defoggers. Turn on the
rear window defogger to turn on the outside rear view mirror defoggers. (P. 417)
Automatic adjustment of the mirror angle
■
A desired mirror face angle can be entered to memory and recalled automatically
by the driving position memory. (P. 157)
Auto anti-glare function
■
When the anti-glare inside rear view mirror is set to automatic mode, the outside
rear view mirrors will activate in conjunction with the anti-glare inside rear view mir-
ror to reduce reflected light. (P. 169)
Using automatic mode in cold weather
■
When automatic mode is used in cold weather, the door mirror could freeze up and
automatic stowing and return may not be possible. In this event, remove any ice and
snow from the door mirror, then either operate the mirror using manual mode or
move the mirror by hand.
LS460/LS460L_U (OM50D48U)
3-4. Adjusting the steering wheel and mirrors
173
3