Lexus LS460 User Manual page 158

158
3-3. Adjusting the seats
Recall procedure
■
Check that the shift lever is in P.
1
Turn the engine switch to IGNITION ON mode.
2
Press one of the switches for
3
the driving position you want
to recall until the buzzer
sounds.
When you want to stop the position recall operation part-way through
■
Perform any of the following operations:
Press the "SET" switch.
●
Press switch "1", "2" or "3".
●
Operate any of the seat adjustment switches (only cancels seat position recall).
●
Operate the tilt and telescopic steering control switch (only cancels steering wheel
●
position recall).
Operate the seat belt shoulder anchor height adjusting switch (only cancels height
●
of seat belt shoulder anchor recall).
Front passenger's seat position recall limitations (vehicles with relaxation seat)
■
When retractable table (4-seat models) or ottoman is used, rearward memories
cannot be recalled.
Operating the driving position memory after turning the engine switch off
■
Driver's seat:
Recorded driving positions (except the steering wheel position) can be recalled up
to 180 seconds after the driver' s door is opened and up to 60 seconds after it is
closed again.
Front passenger's seat:
Recorded seat positions can be recalled up to 180 seconds after the front passen-
ger's door is opened.
In order to correctly use the driving position memory function
■
If a seat position is already in the furthest possible position and the seat is operated in
the same direction, the recorded position may be slightly different when it is recalled.
LS460/LS460L_U (OM50D48U)