Cancelation procedure
■
Using the wireless remote control
Turn the engine switch off and close the driver' s door.
1
While pressing the "SET" switch, press
2
control until the buzzer sounds.
Using the door lock switch
Carry only the key you want to cancel and then close the driver's door.
If 2 or more keys are in the vehicle, the driving position cannot be can-
celed properly.
Turn the engine switch off and close the driver' s door.
1
While pressing the "SET" switch, press the lock or unlock side on the
2
door lock switch until the buzzer sounds.
Recalling the driving position using the memory recall function
■
Different driving positions can be registered for each electronic key. Therefore, the
●
driving position that is recalled may be different depending on the key being car-
ried.
If a door other than the driver's door is unlocked with the smart access system with
●
push-button start, the driving position cannot be recalled. In this case, press the
driving position switch which has been set.
Seat operation automatic stop function (vehicles with relaxation seat)
■
If a front seat is likely to come into contact with the retractable table (4-seat models)
or the ottoman during seat operation or activation of the power easy access system,
a buzzer will sound and seat slide operation will be stopped partway.
(A warning message will be shown on the multi-information display.)
CAUTION
Seat adjustment caution
■
Take care during seat adjustment so that the seat does not strike the rear passen-
ger or squeeze your body against the steering wheel.
LS460/LS460L_U (OM50D48U)
3-3. Adjusting the seats
on the wireless remote
161
3