246
4-5. Using the driving support systems
Cruise control can be set when
■
The shift lever is in the D or range 4 or higher of S has been selected.
●
(except 2WD models with paddle shift switches)
The shift lever is in D.
●
(2WD models with paddle shift switches)
Range 4 or higher of D has been selected by using the paddle shift.
●
(2WD models with paddle shift switches)
Vehicle speed is above approximately 25 mph (40 km/h).
●
Accelerating after setting the vehicle speed
■
The vehicle can be accelerated normally. After acceleration, the set speed
●
resumes.
Even without canceling the cruise control, the set speed can be increased by first
●
accelerating the vehicle to the desired speed and then pushing the lever down to
set the new speed.
Automatic cruise control cancelation
■
Cruise control will stop maintaining the vehicle speed in any of the following situa-
tions.
Actual vehicle speed falls more than approximately 10 mph (16 km/h) below the
●
preset vehicle speed.
At this time, the memorized set speed is not retained.
Actual vehicle speed is below approximately 25 mph (40 km/h).
●
VSC is activated.
●
TRAC is activated for a period of time.
●
When the VSC or TRAC system is turned off by pressing the VSC OFF switch.
●
If the warning message for the cruise control is shown on the multi-information dis-
■
play
Press the "ON•OFF" button once to deactivate the system, and then press the but-
ton again to reactivate the system.
If the cruise control speed cannot be set or if the cruise control cancels immediately
after being activated, there may be a malfunction in the cruise control system. Have
the vehicle inspected by your Lexus dealer.
LS460/LS460L_U (OM50D48U)