Installing The Fork Legs; Removing The Fork Protector - KTM 450 SXS-F Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE
x

Installing the fork legs

Removing the fork protector

Loosen screw
Loosen screw
200369-10
Check parts for damage and wear. Replace damaged or worn parts.
Position the fork legs.
Info
The topmost sunk nut in the fork leg must be flush to the upper edge of the
upper triple clamp.
Position the bleeder screw
200392-11
Fully tighten screw
Specification
Screw, top triple clamp
Fully tighten screw
Specification
Screw, bottom triple clamp
200369-11
Position brake caliper, mount and tighten screws
Specification
Screw, front brake caliper
Position the brake line. Put the clamp on, mount and tighten screws
Fit front wheel.
500093-13
x
Remove the fork legs.
Remove screws
Remove the screws on the right fork leg. Remove the fork protector upwards.
500105-10
. Remove the fork leg on the left.
. Remove the fork leg on the right.
to the front.
.
M8
.
M8
M8
x
( P. 49)
x
( P. 30)
on the left fork leg. Remove the fork protector upwards.
17 Nm
(12.5 lbf ft)
15 Nm
(11.1 lbf ft)
.
®
25 Nm Loctite 243™
(18.4 lbf ft)
.
31