MAINTENANCE ON CHASSIS AND ENGINE
x
Removing the fork legs
Turn the steering stem with the nut
200388-10
Push the lower triple clamp upwards. Mount and tighten screws
Specification
Screw, steering stem, bot-
tom
Mount and tighten screws
Specification
Screw, bottom triple clamp
Info
Screw
Adjust the play of the steering head bearing.
Fit the start number plate. (
Install front fender. (
Remove the motorcycle from the work stand. (
200387-10
Remove front wheel.
Remove screws
Remove screws
Hang the brake caliper and the brake line loosely to the side.
500093-12
another half turn clockwise.
M8
.
M8
is mounted during adjustment work.
x
P. 34)
P. 33)
x
(
P. 48)
and take off clamp.
and take off brake caliper.
.
®
20 Nm
Loctite
243™
(14.8 lbf ft)
15 Nm
(11.1 lbf ft)
(
P. 28)
P. 21)
30