Xerox DocuPrint 4635 Laser System Generation Manual page 59

Steps to perform a mini sysgen
Step Action
1. Press the Boot button.
3. PC UI:
Select your choice of sysgen media
with the mouse.
Terminal:
BD (boot from system disk).
4. Key in MINI and press <ENTER>
5. Enter Y or N and <ENTER>. A Y
and <ENTER> response causes the
change menu to display. Each time a
change is made, the change question
is asked until an N and <ENTER> is
entered, and the sysgen program
continues.
To discard the changes you just
made and continue sysgen, enter Y.
To save the changes you just made
and continue sysgen, enter N.
Enter N and <ENTER>.
XEROX 4635 LASER PRINTING SYSTEM—SYSTEM GENERATION GUIDE
SYSGEN AND SYSGEN-RELATED PROCEDURES
System response
PC UI:
The Boot menu window displays:
Operating System
System Disk
Reel to Reel
QIC
18 Track Tape
Terminal:
The following is displayed:
READY
$
The command menu displays:
COMMANDS Display commands
BOOT Boot the operating system
SYSGEN Build or update system files on disk from
tape or host
FORMAT Format and initialize disk pack
HOSTCOPY Copy user files from host to disk
AUTO Auto Sysgen
MINI Configuration change only
ERASE Erase all files.
The base configuration and the system configuration
options are displayed followed by:
Do you wish to make any changes? Enter 'y' or 'n'
>
Do you want to discard the changes you just made? Enter
'y' or 'n'
4-31