Table of Contents
Advertisement
SYSGEN AND SYSGEN-RELATED PROCEDURES
Steps to perform an offline update sysgen using the SYSGEN command (continued)
Step
Action
4.
Key in SYSGEN and press <ENTER>
5.
Enter N and <ENTER> to allow the
sysgen to continue. Go to step 7.
6.
Enter Y and <ENTER> to allow the
previously entered ID to be changed.
Key in the new ID and press
<ENTER>.
NOTE: When you enter no, sysgen
will continue. If you enter yes,
you will be able to change the
system ID again.
7.
Enter Y or N and press <ENTER>.
8.
Enter Y or N and <ENTER>. A Y
and <ENTER> response causes the
change menu to display. Each time a
change is made, the change question
is asked until an N and <ENTER> is
entered, and the sysgen program
continues.
9.
To discard the changes you just
made and continue sysgen, enter Y.
To save the changes you just made
and continue sysgen, enter N.
Enter Y and <ENTER>.
4-18
System response
* Sysgen program running *
System ID is: xxxxx
Do you want to enter a new system id? 'y' or 'n'
Enter system ID of up to 30 characters
....*....*....*....*....*....*
>
System ID IS: xxxxx
Do you want to enter a new system id? 'y or 'n'
Do you want to save the accounting file? enter 'y' or
'n'
The base configuration and the system configuration
options are displayed followed by:
Do you wish to make any changes? Enter 'y' or 'n'
>
Do you want to discard the changes you just made? Enter
'y' or 'n''
>
Is continuation of sysgen required? (y or n)
Should sysgen read from host or tape? 'h' or 't'
XEROX 4635 LASER PRINTING SYSTEM—SYSTEM GENERATION GUIDE
Advertisement
Table of Contents
