Table of Contents
Advertisement
Steps to perform an online update sysgen (continued)
Step
Action
16.
Enter Y or N and <ENTER>.
17.
To discard the changes you just
made and continue sysgen, enter Y.
To save the changes you just made
and continue sysgen, enter N.
Enter Y and <ENTER>.
18.
For an online sysgen, enter H (host)
and press <ENTER>.
19.
Request the host operator to vary
the printing system online.
Note: The host job is identical to
the one used in step 10, except
that it spaces one file farther
down the SST.
20.
Enter Y or N depending on whether
additional data is to be transmitted.
21.
Request the host operator to vary
the printing system offline, then
enter C and press <ENTER>.
XEROX 4635 LASER PRINTING SYSTEM—SYSTEM GENERATION GUIDE
SYSGEN AND SYSGEN-RELATED PROCEDURES
System response
A Y and <ENTER> response causes the change menu to
display. Each time a change is made, the change
question is asked until an N and <ENTER> is entered,
and the sysgen program continues with the following.
Do you want to discard the changes you just made? Enter
'y' or 'n'
>
Is continuation of sysgen required? (y or n)
Should sysgen read from host or tape? 'h' or 't'
>
Waiting to read files from host.
You can then submit a job from the host to transmit the
last SST file to the printing system. This file contains a
concatenation of all system files on the SST. The new
sysgen processor uses these files to build a new
operating system on the LPS system disks.
System files are listed as they are read in from the host
onto the system disks.
End of tape found. Is another tape to be sent? y or n
When N is selected the following is displayed.
Vary offline at host. Then enter 'C'
The sysgen finishes processing and the
*
Sysgen process successful *
* Sysgen program off *
Enter Cmd ['C' for Menu]>
4-27
Advertisement
Table of Contents
