Xerox DocuPrint 4635 Laser System Generation Manual page 38

SYSGEN AND SYSGEN-RELATED PROCEDURES
Steps to perform a full sysgen (continued)
Step Action
20. PC UI:
Enter the month (MM), day (DD),
and year (YY) in the appropriate
boxes of the date window
(use the <TAB> key to advance
from box to box) and select the
Apply/Close header button.
Enter the hour (HH), minute (MM),
and second (SS) in the appropriate
boxes of the time window
(use the <TAB> key to advance
from box to box) and select the
Apply/Close header button.
Terminal:
Enter the date and time. Entry of the
seconds (ss) is optional.
Enter Y or N to indicate whether
time and date are correct.
21.
22. Enter the patch ID's that are needed
for the system and press <ENTER>,
OR just press <ENTER>.
4-10
System response
The time window displays.
mm/dd/yy hh:mm:ss
ARE THE DATE AND TIME CORRECT AS DISPLAYED (Y/N)?
The system displays:
**Applying sysgen patches**
The following patches may be selected by PATCH-ID:
PATCH-ID INVOKES
-------- -------
MER001 Patch to allow Mergenthaler fonts only.
Enter patch ID's or press ENTER:
***RESUMING SYSGEN PATCHES***
** Sysgen patches completed**
** Deleting sysgen patches**
* ! Crash/Reboot will occur in 15 seconds ! *
PC UI:
The system reboots, the messages window appears
followed by the appearance of the OS2660 accounting
reports message window.
Terminal:
The system reboots, the OS2660 accounting reports
message appears.
XEROX 4635 LASER PRINTING SYSTEM—SYSTEM GENERATION GUIDE