Table of Contents
Advertisement
Steps to perform a full sysgen (continued)
Step
Action
17.
To discard the changes you just
made and continue sysgen, enter Y.
To save the changes you just made
and continue sysgen, enter N.
18.
Enter 'h' (for host/online sysgen) or
't' (for offline sysgen) and press
<ENTER>.
NOTE: The system response is for
offline sysgen. For online sysgen refer
to step 9 of the Online Update
sysgen.
19.
Key in B (boot) and press <ENTER>.
XEROX 4635 LASER PRINTING SYSTEM—SYSTEM GENERATION GUIDE
SYSGEN AND SYSGEN-RELATED PROCEDURES
System response
Do you want to discard the changes you just made? Enter
'y' or 'n'
>
Creating file DISPCF.SYS on drive 0.
Should sysgen read from host or tape? 'h' or 't'
Reading files from tape/host
Each file is read from the online channel or tape and
placed on the disk.
Creating file xxxxxx.yyy on drive n
is the system file name,
xxxxxx
is the system file type, and
yyy
is the drive number that the file is stored onto.
n
When sysgen completes, the following message displays:
* Tape rewinding *
Sysgen process successful *
* Sysgen program off *
Enter Cmd ['C' for Menu]>
The OSS loads onto the system disk.
PC UI:
The messages window displays:
CPU Test Complete
Imaging Devices Present
Memory test in progress
Memory test complete
Loading Start-Up Task
XEROX 4635
Laser Printing System
Version Revision
Disk ID = xxxx
The date window displays.
Terminal:
Loading program . . .
Time prompt appears.
is displayed.
4-9
Advertisement
Table of Contents
