Working With Configurations; Online And Offline Mode; Selecting A Configuration - miniDSP DDRC-24 User Manual

Ultra-compact 2-in 4-out audio processor with dirac live room correction technology
Hide thumbs Also See for DDRC-24:
Table of Contents

Advertisement

9.5 W
ORKING WITH CONFIGURATIONS
The data that controls the audio processing is called a configuration. The processor stores four configuration
presets in its internal memory, which can be selected from the plugin or via remote control.

9.5.1 Online and offline mode

Initially, the plugin is in offline mode. When the Connect&Synchronize button is used, the plugin downloads
configuration data into the processor and goes into online mode. Changes made in the plugin user interface
therefore fall into two categories:
The plugin is in online mode
The plugin user interface is "live" – that is, any changes made to the audio processing parameters in the
user interface are immediately downloaded to the processor. The effect of these changes will thus be
audible as the changes are made.
The plugin is in offline mode
Changes made to audio processing parameters in the plugin user interface will be made locally only. The
next time the plugin is synchronized to the processor, the parameters will be downloaded to the processor
(as long as the Synchronize Config button is selected).
The configuration contained in the miniDSP hardware unit cannot be uploaded back to the
computer. Therefore, you must save your configuration to a file if you wish to recover from any
changes you make while in offline mode.

9.5.2 Selecting a configuration

The active configuration is selected by one of the four Configuration Selection buttons:
To switch to a different configuration, click on a different button. There are two cases:
The plugin is in online mode
Audio processing will switch to the parameters contained in the selected configuration. If, however,
parameters of the newly selected configuration have been changed since the last that particular
configuration was synchronized to the processor, then a dialog will appear asking you if you want to
synchronize the configuration.
The plugin is in offline mode
The user interface will update to show the parameters of the newly selected configuration. If this
configuration is changed in the user interface, it will be downloaded to the processor the next time it is
synchronized.
miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
55

Advertisement

Table of Contents
loading

Table of Contents