Table of Contents
Advertisement
5.2 C
ONNECTIONS FOR ACOUSTIC MEASUREMENT
The figure below shows a typical connection diagram for performing acoustic measurement. No changes to
existing audio connections are needed. Simply:
1.
Connect a supplied USB (type A to mini type B) cable from the processor to a USB port on the computer.
2.
Connect a supplied USB (type A to mini type B) cable from the UMIK-1 to a USB port on the computer.
Place the UMIK-1 microphone into the microphone stand. Position the computer and cabling so that there is
enough freedom of movement to move the microphone into the needed locations.
miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
28
Advertisement
Table of Contents
