Table of Contents
Advertisement
4.1 S
YNCHRONIZING WITH THE PROCESSOR
Communication takes place over a USB connection. Ensure that the computer is connected to the DDRC-24 via
USB. Then click on the Connect button:
The first time you connect, or if you have made any changes to any data in the user interface, a dialog box will
appear:
The options are:
Restore ALL to default
The very first time you connect to the processor, this option will appear. It is strongly recommended that
you select this option the first time you connect.
Synchronize Config
Download the data for the currently selected configuration into the processor. After downloading the
configuration data, the plugin is in online mode and any changes to processing parameters will be
downloaded immediately in real time.
Synchronize and Upgrade
This is similar to Synchronize Config, but also upgrades the internal data of the processor. This option may
appear after downloading and installing an updated version of the plugin.
Restore Config
Restore the data in the currently selected configuration to the factory defaults. When using this option,
any connected equipment should be muted or powered off until you have set the configuration to a
working state. Note that the configuration data will be lost, so if needed, ensure that you have saved the
configuration to a file prior to using this option.
Help
This option brings up a help screen explaining the options.
Cancel
This option cancels the attempt to connect to the processor. The plugin will remain in offline mode.
miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
20
Advertisement
Table of Contents
