Designing Your Target Curve; The Auto Target - miniDSP DDRC-24 User Manual

Ultra-compact 2-in 4-out audio processor with dirac live room correction technology

Hide thumbs Also See for DDRC-24:

Table of Contents

By default, graphs of both left and right channels are shown together. The left and right channels can be

unlinked by clicking on the small "chain" icon next to the channel name, at the right of the graphs. Then the

graphs of each channel can be viewed separately, by click on the "Left" or "Right" tab. To relink the two

channels, drag the "disconnected" channel tab over the top of the selected channel.

6.2 D

ESIGNING YOUR TARGET CURVE

The target curve is the desired in-room frequency response with the miniDSP DDRC-24 performing digital room

correction.

When first viewing the Filter Design tab, an estimated target curve suitable for your speakers is shown as the

red curve. This calculated target curve can be restored at any time by clicking on the Auto Target button.

Note: restoring the auto target will erase the current target curve. If you wish to keep it, you can save it to a file

– see

Saving and loading target curves

below

miniDSP Ltd, Hong Kong /

www.minidsp.com

/ Features and specifications subject to change without prior notice

Table of Contents