Table of Contents
Advertisement
3.3 2
4 HD
DDRC-24
X
TO
If you have purchased an upgrade to convert a miniDSP 2x4 HD to a DDRC-24, follow the steps below. (If you
purchased a DDRC-24, you do not need to do anything on this page.)
1.
Update the firmware to the DDRC-24 version. The procedure is described in
page 59. You must use the firmware file included in the DDRC-24 software download, in the
XMOS_Firmware folder. It will have a name like DDRC-24_XMOS_v1.5.bin.
2.
Power-cycle the hardware unit: remove power, wait a few seconds, and then reconnect power.
3.
Start the DDRC-24 plugin. Click the Connect button (towards the top right).
4.
The following screen will appear:
5.
Click on the button "Copy Activation Code to Clipboard."
6.
Send an email message to
body of the email message, paste the activation code from the above step.
7.
miniDSP will respond in normal (Hong Kong) working hours with an activation key file (.txt file). (Please
note that this is not an automated process.) This file contains a key text string consisting of 128 pairs of
letters separated by spaces (total 256 letters). Save this file to disk.
8.
Click the "Import" button and select the received activation key file to import into the plugin. If successful,
you will then see a connection dialog box similar to the one on page 20. Click on "Reset ALL to defaults."
9.
The Connect button will change to show that you are connected to the DDRC-24:
miniDSP Ltd, Hong Kong /
www.minidsp.com
UPGRADE
info@minidsp.com
with the Subject line "DDRC-24 Activation Request." In the
/ Features and specifications subject to change without prior notice
Firmware upgrade
starting on
16
Advertisement
Table of Contents
