Hardware Connectivity; Digital Input; Analog Inputs And Outputs - miniDSP DDRC-24 User Manual

Ultra-compact 2-in 4-out audio processor with dirac live room correction technology

Hide thumbs Also See for DDRC-24:

Table of Contents

2 H

ARDWARE CONNECTIVITY

2.1 D

IGITAL INPUT

Connect a single digital source to the optical (TOSLINK) connector. Thanks to its asynchronous sample rate

convertor (ASRC), all sample rates between 44.1 and 192 kHz are accepted.

Note: the digital input accepts only a stereo PCM digital signal. It does not accept encoded or multichannel

digital audio (such as Dolby Digital or DTS).

2.2 A

NALOG INPUTS AND OUTPUTS

Connect an analog source or preamplifier to the RCA connectors on the front panel, and connect the four analog

outputs to power amplification or subwoofer(s). Be sure to take careful note of the channel numbering shown in

this diagram and on the rear panel.

miniDSP Ltd, Hong Kong /

www.minidsp.com

/ Features and specifications subject to change without prior notice

Table of Contents