Usb; Dc Power - miniDSP DDRC-24 User Manual

Ultra-compact 2-in 4-out audio processor with dirac live room correction technology

Hide thumbs Also See for DDRC-24:

Table of Contents

2.3 USB

Connect the USB (Type B mini) port of the DDRC-24 to a free USB 2.0 port on your computer using the supplied

cable. The USB connection is used for:

 Configuration with the DDRC-24 plugin and Dirac Live Calibration Tool for miniDSP, and

 Streaming audio from a computer or other device such as a music streamer, at up to 192 kHz.

2.4 DC

POWER

The supplied 12 VDC power supply includes a set of interchangeable power pins (for USA, UK, Europe and

Australia). Fit the correct pins for your country. Connect the DC plug to the 12 VDC power socket.

Apply power to the processor only after all input and output connections have been made. The

processor uses very little power and so can be left powered on. If powered on and off, the following

sequence is always recommended:

 On: Power on line-level equipment, including the DDRC-24, then turn on power amplification.

 Off: Turn power amplification off, then power off line-level equipment, including the DDRC-24.

miniDSP Ltd, Hong Kong /

www.minidsp.com

/ Features and specifications subject to change without prior notice

Table of Contents