Table of Contents
Advertisement
3.
If you purchase more than one miniDSP processor with Dirac Live, each will need to be activated with its
unique serial number. For each additional processor, use the form shown on the right in step 3 above.
3.4.2 License validation
Start the Dirac Live Calibration Tool For miniDSP program. It will ask you to validate your software license. Enter
the email address and password that you used when activating your license, and then click on Validate:
You will need to be connected to the Internet to validate your license. Any active firewalls will need to have
HTTP (normal web traffic) enabled.
The Username that you enter in the validation screen must be the email address that you used in the
activation screen in step 3 on page 17. It is not your miniDSP website username.
3.4.3 License removal
The Dirac Live Calibration Tool For miniDSP program (stereo version) can be installed on up to two computers.
If you upgrade to a new computer, please make sure to uninstall Dirac Live Calibration Tool For miniDSP from
the old computer. This will contact the Dirac license server to remove that computer from your license.
In the event that you do run into the maximum installation limit (this can happen if a computer crashes, for
example, or occasionally with an upgrade or OS incompatibility), you can manually clear the old computer from
your license. Go to:
http://www.minidsp.com/dirac-series/activate/#activate
Click "CLICK TO ACTIVATE YOUR DIRAC LICENSE" and then on the "license service" link at the bottom of that
page. Log in to the Dirac server with your registered email address and password, as used in
There you can manually delete the old computer from your Dirac Live license by clicking on the trashcan icon at
the right.
miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
License
validation.
18
Advertisement
Table of Contents
