Curve - M-Audio code25 User Manual

Curve

The curve setting for the pads determines their velocity sensitivity—the amount of force
required to generate a note with a specific velocity.
To set the pad curve:
1. Press Edit to enter Edit Mode. The Edit button will light up.
2. Press the Curve key twice. The display will show PCrV and the current curve setting:
Display Curve
Number
PCrVC1 01
PCrVC2 02
03
PCrVC3
04
PCrVC4
05
PCrVF1
06
PCrVF2
07
PCrVF3
08
PCrVS2
PCrVS3 09
PCrVS4 10
3. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter the desired curve
number (1–10).
4. Press the Enter key. The pads will now use that curve, and you will exit Edit Mode.
To cancel your changes instead, press Edit. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
Description
This is a low-sensitivity setting, useful for playing notes with mostly
low velocities.
This is a medium-sensitivity setting (the default), useful for playing
with an average amount of force.
This is a high-sensitivity setting, useful for playing notes with
mostly high velocities.
This is a linear curve. The velocity of the note will be proportional
to the amount of force.
All notes will have a fixed velocity of 64.
All notes will have a fixed velocity of 100.
All notes will have a fixed velocity of 127.
All notes will have a velocity of 64 or 127, depending on the
amount of force.
All notes will have a velocity of 64, 100, or 127, depending on the
amount of force.
All notes will have a velocity of 32, 64, 100, or 127, depending on the
amount of force.
81