Midi Cc Value Cycle - M-Audio code25 User Manual

MIDI CC Value Cycle

You can also set a pad to cycle through 3 or 4 MIDI CC values by each time you press it.
To assign a pad to cycle through 3 or 4 MIDI CC values:
1. Press Edit to enter Edit Mode. The Edit button will light up.
2. Press the desired pad. The pad's number will appear in the display.
3. Press the Ctrl Assign key. The display will show ASGN for 1 second and then show the
pad's number (P__) and a number for the type of message it sends.
4. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter 146.
5. Press the Data 1 key. The display will show DATA1 for 1 second and then show the pad's
number (P__) and the MIDI CC value it will increment/decrement.
6. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter a value (000–127).
7. Press the Data 2 key. The display will show DATA2 for 1 second and then show the pad's
number (P__)) and the lowest value it will send.
8. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter a value (000–127).
9. Press the Data 3 key. The display will show DATA3 for 1 second and then show the pad's
number (P__) and the highest value it will send.
10. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter a value (000–127).
11. Press and hold Shift, and then press the Data 3 / –/+ key. The display will show DATA+1
for 1 second and then show the pad's number (P1–P16) an additional value it will send.
12. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter a value between
the lowest and highest values (000–127).
13. Optional: To set one more value the pad will send, repeat Steps 11–12 once more.
14. Press the Enter key. The pad is now set to cycle through the 3 or 4 assigned MIDI CC
values, and you will exit Edit Mode.
To cancel your changes instead, press Edit. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
75