Messages; Midi Ccs - M-Audio code25 User Manual

Messages

MIDI CCs

You can assign the buttons to send MIDI CC messages with a "pressed" value and a
"released" value.
The buttons must be in MIDI Mode to do this (see
To assign a MIDI CC to a button:
1. Press Edit to enter Edit Mode. The Edit button will light up.
2. Press the desired button. The button's number will appear in the display.
3. Press the Ctrl Assign key. The display will show ASGN for 1 second and then show the
button's number (B__) and a number for the type of message it sends.
4. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter a MIDI CC number
(001–127).
5. Press the Data 2 key. The display will show DATA2 for 1 second and then show the
button's number (B__) and the value it will send when released.
6. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter a value (001–127).
7. Press the Data 3 key. The display will show DATA3 for 1 second and then show the
button's number (B__) and the value it will send when pressed.
8. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter a value (001–127).
9. Press the Enter key. The button is now set to send the assigned MIDI CC, and you will exit
Edit Mode.
To cancel your changes instead, press Edit. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
Modes > MIDI Mode).
48