Latching - M-Audio code25 User Manual

Latching

By default, the pads are set to send one value when pressed and one value when released.
This is often called "momentary" behavior. You can change this so that a pad sends one value
when pressed and a different value when pressed a second time, alternating between the two
values with each press. This is often called "latching" or "toggle" behavior.
To set a pad to latching behavior:
1. Press Edit to enter Edit Mode. The Edit button will light up.
2. Press the desired pad. The pad's number will appear in the display.
3. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter 146 (if the display
does not already show it). This sets the pad to use latching behavior.
4. Press the Data 1 key. The display will show DATA1 for 1 second and then show the pad's
number (P__) and a number for the MIDI CC.
5. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter the desired MIDI
CC number (001–127).
6. Press the Data 2 key. The display will show DATA2 for 1 second and then show the pad's
number (P__) and the value it will send when pressed the first time.
7. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter the desired value
(001–127).
8. Press the Data 3 key. The display will show DATA3 for 1 second and then show the pad's
number (P__) and the value it will send when pressed the second time.
9. Use the numeric keys (0–9) or Preset Down/Up () buttons to enter the desired value
(001–127).
10. Press the Enter key. The pad is now set to latching, and you will exit Edit Mode.
To cancel your changes instead, press Edit. You will exit Edit Mode without saving anything.
Remember to store the preset if you want to save your changes in that preset.
To return the pad to its default "momentary" behavior, set it to send a MIDI note, send a MIDI
CC, or increment the program number. Please see the earlier
do this.
Message section to learn how to
80