Sending Method - Konica Minolta BIZHUB 131f User Manual

Sending Faxes
9.1.5

Sending method

The following three sending methods are available on your machine.
Memory transmission
For a normal memory transmission, your machine:
1. scans your entire document into memory,
2. dials the other fax machine, then
3. transmits the document.
Quick memory transmission
For a quick memory transmission, your machine doesn't wait to scan all pag-
es into memory before dialing. After it scans the first page of your document,
your machine dials the other fax machine. When it makes contact, your ma-
chine transmits the stored document from memory while at the same time
scanning the remaining pages of your document into memory.
The quick memory transmission is on for default setting. However, you can
turn off it for the default. (See "User settings [CD]" on page 14-3.)
Real time transmission
In the following cases, the machine doesn't use its memory for sending a fax:
-
-
-
In Real time transmission, the next page is not scanned in while the current
page is being transmitted.
Notes that in the real time transmission:
-
-
Downloaded From ManualsPrinter.com Manuals
bizhub 131f/190f
When you turned off the memory transmission.
When you are sending a fax with on-hook dialing (by pressing [Advanced
Functions] repeatedly until "Monitor" is appear and press [Enter]) or using
an external telephone handset.
When the machine's memory is full.
Only one destination can be dialed
The document glass cannot be used for the real time transmission
9
9-5