Konica Minolta BIZHUB 131f User Manual page 46

3
Dial tone detection
7
8
9
Your fax number
10
11
12
Downloaded From ManualsPrinter.com Manuals
3-20
The machine asks you to set whether
the machine should detect a dial
tone before dialing.
Normally select "Off". If you need to detect a dial tone at dialing, select
"On", however you cannot send a fax when there is no dial tone.
Press [Enter] to save the setting and continue.
The machine now asks you to enter
your fax number as you want it to ap-
pear on other fax machines's dis-
plays or printouts.
Use the numeric keys to enter your fax number. The number can con-
tain up to 20 characters.
To enter a "+" symbol before your contry code, press [Advanced Func-
tions] repeatedly until "Pause/Dial Opt." is displayed on the LCD then
press [Enter].
To enter the hyphen "–" to make long numbers easier to read, press
[Advanced Functions] repeatedly until "Pause/Dial Opt." is displayed
then press [Enter]. Repeat this procedure again to enter a "–" character
on the LCD.
If you make a mistake, press [Cancel] to erase to the left. To change
just one number, press [*] or [)] to move the cursor, press [Cancel] to
erase the number. Then re-enter the fax number correctly.
Press [Enter] to save the number.
Layout and installation
bizhub 131f/190f