Polycom VVX 400 User Manual page 30

To display the Dialer, do one of the following :
From Home view, select New Call.
From Lines or Calls view, press New Call. (The New Call soft key won't display if you have
an active call.)
If your phone is idle, start entering a phone number.
Pick up the handset, or press
active call.
In Lines view, press a line key that doesn't have any calls.
Power Tip : Choosing URLs or Numbers Mode
from the Dialer
To enter a URL in the Dialer, tap URL. To exit URL mode and enter numbers, tap Number.
Note : No New Call Icon when Maximum Calls Reached
The New Call soft key is not displayed when the maximum number of calls is reached (24).
When you access the Dialer, an active call is held.
To display the Dialer, do one of the following :
Enter the number, and then pick up the handset, press a line key, press
or if you're already in handset, speakerphone, or headset mode, enter the number, and
press Dial.
30
or . This method only works if you don't have an
, or press .