Ending Ptt Broadcasts; Adjusting The Volume Of Ptt Broadcasts; Changing Where Broadcasts Are Played; Updating The Default Channel - Polycom VVX 400 User Manual

Ending PTT Broadcasts

You can end a PTT broadcast by releasing Talk, or by pressing End PTT. After you end a
broadcast, the channel remains open so others can respond.
If you release Talk without pressing End PTT :
You can resume the broadcast by pressing and holding Talk, if the broadcast is in a wait period.
You can't initiate another broadcast on another channel until the waiting period ends.
If you press End PTT :
You can't resume the broadcast by pressing and holding Talk.
You can immediately initiate another broadcast on another channel.

Adjusting the Volume of PTT Broadcasts

You can adjust the volume of PTT broadcasts while they play. During a broadcast, press one
of the Volume keys,
If you adjust the volume of a non-emergency broadcast, your phone retains the adjusted
volume for all subsequent non-emergency broadcasts. However, only system administrators
can adjust the volume level of an Emergency broadcast.

Changing Where Broadcasts are Played

While you send a broadcast, you can pick up the handset, or press
speaking. You can also press
broadcast won't hear anything. This behavior is similar to a phone call.
When you listen to a broadcast, you can pick up the handset, or press
listening to the broadcast.

Updating the Default Channel

If you press and hold Talk, your broadcast will automatically transmit on the default channel,
Channel 1. If you want, you can change the default channel.
74
- +
, to raise or lower the volume of the broadcast.
to mute your audio so that the people receiving your
or , and continue
or , and continue