Changing The Engine Oil - Toro 74142TE Operator's Manual

A
B
C
D
F
G
I
H
Figure 43

Changing the Engine Oil

Service Interval: After the first 8 hours
Note: Dispose of the used oil at a recycling center.
G008804
1. Park the machine so that the rear is slightly lower than
2. Disengage the PTO, move the motion-control levers to
3. Stop the engine, remove the key, and wait for all moving
4. Change the engine oil
E
J
G027659
5. Slowly pour approximately 80% of the specified oil
34
Every 100 hours (more often in dirty or dusty
conditions).
the front to ensure the oil drains completely.
the neutral-locked position and set the parking brake.
parts to stop before leaving the operating position.
(Figure
Figure 44
into the filler tube and slowly add the additional oil to
bring it to the Full mark (Figure
44).
G008804
45).