Product Overview; Controls - Toro 74142TE Operator's Manual

Product Overview

5
4
3
2
1
11
1. Height-of-cut deck lift
pedal
2. Transport lock
3. Parking brake lever

4. Controls

5. Motion-control levers
6. Roll bar
Controls
Become familiar with all the controls before you start the
engine and operate the machine
2
1
G017418
1. PTO Switch
2. Choke
3. Throttle control
Hour Meter
The hour meter records the number of hours the engine has
operated. It operates when the engine is running. Use these
times for scheduling regular maintenance
6
7
8
9
10
G020562
Figure 4
7. Seat belt
8. Fuel cap
9. Mower deck
10. Caster wheel
11. Z Stand®
(Figure 4 and Figure
3
4
Figure 5
4. Hour meter
5. Ignition switch
6. Fuses
(Figure 5).
Throttle Control
The throttle control is variable between Fast and Slow.
Choke
Use the choke to start a cold engine. Pull the choke knob up
to engage it.
Blade-Control Switch (PTO)
The blade-control switch (PTO) is used to engage the electric
clutch and drive the mower blades. Pull the switch up to
engage the blades and release. To disengage the blades,
push the blade-control switch (PTO) down or move a
motion-control lever into the neutral-lock position.
Ignition Switch
This switch is used to start the mower engine and has three
positions: Start, Run and Off.
Motion-Control Levers
The motion-control levers are used to drive the machine
forward, reverse, and turn either direction.
Neutral-Lock Position
The neutral-lock position is used with the safety-interlock
system to engage and to determine neutral position.
5).
Fuel Shutoff Valve
5
Close the fuel shutoff valve (under the seat) when transporting
or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
6
13