Tub Removal; Drying Duct - Top Tub Only - Fisher & Paykel DishDrawer DD24D Series Service Manual

Hide thumbs Also See for DishDrawer DD24D Series:
Table of Contents

Advertisement

599735A
8.6

Tub Removal

1.
Open the drawer.
2.
Removing the drawer front (refer to Section 8.2) makes it
easier to slide the tub clips back (optional).
• Top tub: Depress the right-hand tub clip and push it
back about 30mm (1 inch). Repeat for the left-hand
side.
• Bottom tub: Remove the toe kick (refer to Section 8.4)
and cowling (refer to Section 8.5), both optional.
3.
If the cowling has not been removed, the tub clips needs
to be pushed back about 130mm (5 inches) so that the
slide clears the cowling when the tub is lifted off.
4.
Lift the tub off the slides and push the runners back into
the product.
5.
Releasing the wire from the centre clip on the link
assembly
the chassis (optional).
6.
If the tub is being turned over for servicing, rotate it
counter
baskets first. Removing
from being damaged.
Refit in reverse manner.
8.7

Drying Duct - Top Tub Only

1.
Open the drawer and remove the drawer front (refer to
Section 8.2).
2.
Use pliers to gently release the plastic clips while pulling the
duct down.
allows the tub to be moved further from
clockwise, remembering to remove the
the handle will prevent it
48

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents