Pl 10.11 Inverter Assembly (1 Of 4) - Xerox WorkCentre 5790 Family Service Manual

PL 10.11 Inverter Assembly (1 of 4)

Item Part Description
1 011E25300 Link arm
2 – Shaft actuator (P/O PL 10.11 Item
25) (REP 10.9)
3 – LH Spring (P/O PL 10.11 Item 25)
4 006K30320 Nip split shaft assembly (NOTE)
(REP 10.8)
5 – RH Spring (P/O PL 10.11 Item 25)
6 121K44380 Inverter nip solenoid (SOL10-050)
(REP 10.5)
7 059E05230 Single exit nip roll (REP 10.6)
8 059K49900 Double exit nip roll (REP 10.6)
9 – Not used
10 – Nip roll guide (P/O PL 10.11 Item
23) (REP 10.6)
11 127K53210 Inverter motor (MOT10-040) (35-55
ppm) (REP 10.3)
– 127K53540 Inverter motor (MOT10-040) (65-90
ppm) (REP 10.3)
12 – Inverter output assembly (P/O PL
10.11 Item 23)
13 130E12080 IOT Exit sensor (Q10-120) (REP
10.17)
14 121K44390 Inverter path solenoid (SOL10-045)
(REP 10.4)
15 – Not used
16 – Not used
17 – Inverter nip solenoid bracket (P/O
PL 10.11 Item 25)
18 – Solenoid link (P/O PL 10.11 Item
23)
19 – Bearing (P/O PL 10.11 Item 25)
20 – Thermistor assembly (Not Spared)
(65-90 ppm) (W/O TAG 120)
21 – Inverter locator (Not Spared) (W/O
TAG 046, TAG 047)
22 960K32891 Inverter motor driver PWB (65-90
ppm)
– 960K41881 Inverter motor driver PWB (35-
55ppm)
23 – Inverter assembly (See below for
variants)
– – Inverter assembly (P/O PL 31.11
Item 14) (35-55 ppm) (W/O TAG
046) (REP 10.2)
– – Inverter assembly (112K00813)
(65-90 ppm) (W/O TAG 047) (REP
10.2)
– – Inverter decurler assembly (REF:
PL 10.20 Item 5) (35-55 ppm) (W/
TAG 046) (REP 10.2)
– – Inverter decurler assembly (REF:
PL 10.20 Item 5) (65-90 ppm) (W/
TAG 047) (REP 10.2)
– – Inverter decurler assembly (REF:
PL 10.21 Item 5) (W/TAG 148)
(REP 10.2)
24 – Output guide (P/O PL 10.11 Item
25) (REP 10.18)
25 – Output guide assembly (Not
Spared)
NOTE: HFSI. To reset the HFSI count, refer to GP 17.
Parts Lists
PL 10.11
May 2013
5-62 Xerox® WorkCentre® 5790 Family