Pl 5.35 Input Tray Assembly - Xerox WorkCentre 5790 Family Service Manual

PL 5.35 Input Tray Assembly

Item Part Description
1 – Input tray assembly (complete) (Not
Spared) (REP 5.14)
2 004K00971 Pad
3 031E11310 Restack arm
4 050E22922 Input tray
5 423W00949 Feed motor drive belt (ADJ 5.1)
6 059K84630 Takeaway roll assembly (REP 5.6)
7 125E00430 Static eliminator (small) (REP 5.17)
8 130E18340 DADH Length sensor 1 (Q05-315)/
DADH Length sensor 2 (Q05-320)
(See NOTE) (W/TAG D-007) (REP
5.9)
9 – Lower cover (right) (P/O PL 5.35
Item 18) (40-90 ppm)
10 115K02540 Static eliminator (large)
11 103K01511 Document width sensor (Q05-325)
(REP 5.16)
12 – Bearing (P/O PL 5.35 Item 1)
13 014E61020 Spacer (black)
14 – Spacer (white) (P/O PL 5.35 Item 1)
15 – Pulley (P/O PL 5.35 Item 1)
16 – Sensor bracket (P/O PL 5.35 Item
1)
17 059K43920 Exit roll assembly (REP 5.13)
18 – Not used
19 130E11200 Document present sensor (Q05-
310) (40-90 ppm)
20 – Lower cover (Left) (P/O PL 5.35
Item 1) (40-90 ppm)
21 – Lower cover (P/O PL 5.35 Item 1)
(35 ppm)
NOTE: This part is also spared as part of a kit PL 31.13 Item
3 containing 2 sensors.
Parts Lists
PL 5.35
May 2013
5-18 Xerox® WorkCentre® 5790 Family