Pl 8.45 Tray 5 Feed Assembly (2 Of 3) - Xerox WorkCentre 5790 Family Service Manual

PL 8.45 Tray 5 Feed Assembly (2 of 3)

Item Part Description
1 059K69991 Upper feed assembly (REP 8.38)
2 – Upper feed assembly base (P/O PL
8.45 Item 1)
3 – One way gear (P/O PL 8.45 Item
20) (W/TAG P-002)
– – One way gear (Not Spared) (W/O
TAG P-002)
4 – One way coupling (P/O PL 8.45
Item 20)
5 – Take away idler roller (P/O PL
31.13 Item 4)
6 130E11610 Tray 5 empty (Q07-401) /feed
sensor (Q08-105) (REP 7.13, REP
8.25)
7 130E12060 Stack height sensor (Q07-402)
(REP 7.14)
8 013E93370 Bearing
9 – Torsion spring (P/O PL 8.45 Item 1)
10 – Nudger roll (P/O PL 8.45 Item 20,
22) (W/TAG P-002)
– – Nudger roll (Not Spared) (W/O TAG
P-002)
11 – Upper feed assembly top cover (P/
O PL 8.45 Item 1)
12 – Feed roll (P/O PL 8.45 Item 20, PL
8.45 Item 22) (W/TAG P-002)
– – Feed roll (Not Spared) (W/O TAG
P-002)
13 – Clutch (P/O PL 8.45 Item 20)
14 – Gear (38T) (P/O PL 8.45 Item 1)
15 – Roller belt (P/O PL 8.45 Item 1)
16 – Washer (P/O PL 8.45 Item 1)
17 – Torsion chute spring (P/O PL 8.45
Item 1)
18 – Housing spring (P/O PL 8.45 Item
1)
19 – Torsion nudger spring (P/O PL 8.45
Item 1)
20 604K84480 Feed roll retrofit kit (See NOTES 1
& 3) (W/TAG P-002)
21 – Not used
22 604K55480 Feed roll kit (Pack of 3) (See
NOTES 2 & 3) (W/TAG P-002)
NOTE: 1. Install kit to improve performance and reduce mis-
feed faults.
NOTE: 2. Replaces the rolls installed with the feed roll
retrofit kit, PL 8.45 Item 20.
NOTE: 3. HFSI. To reset the HFSI count, refer to GP 17.
Parts Lists
PL 8.45
May 2013
5-52 Xerox® WorkCentre® 5790 Family