Pl 31.14 Maintenance/Installation/Removal Kits (5 Of 5) - Xerox WorkCentre 5790 Family Service Manual

PL 31.14 Maintenance/Installation/
Removal Kits (5 of 5)
Item Part Description
1 604K53913 Inverter decurler kit (35-55 ppm)
(REF: PL 10.20 Item 1) (W/TAG
046)
– 604K55012 Inverter decurler kit (65-90 ppm)
(REF: PL 10.20 Item 1) (W/TAG
047)
2 498K17550 Foreign device interface kit
3 604K55120 Decurler soft roll repair kit (REF: PL
10.13 Item 9)
4 604K55050 Paper feed module frame repair kit
(REF: PL 7.10) (W/TAG 101)
5 604K55500 Skew bypass tray spares kit (x2
spring) (REF: PL 7.30 Item 29) (W/
TAG 048)
6 – Shim kit (REF: PL 5.17 Item 29) (W/
TAG D-003)
7 – LCSS Hole Punch Repair Kit (REF:
PL 11.6 Item 9)
8 604K55570 Drive roll repair kit (Pre-reg PL 8.15
Item 26, PL 8.17 Item 27) (Duplex
PL 8.20 Item 17, PL 8.22 Item 16)
(Inverter PL 10.14 Item 11) (SPP
PL 10.25 Item 11) (W/TAG 051)
9 604K60701 DADH mylar guide kit (REF: PL
5.10 Item 17)
10 498K17546 CAC enablement kit (USSG/XCL)
11 604K73370 BM Diverter kit (XE)
12 146E02210 Magstripe USB reader
13 – 20A adaptor kit (605K17470)
14 – Install kit (USSG/XCL) (35-55 ppm)
– – Install kit (USSG/XCL) (65-90 ppm)
– – Install kit (XE) (35-55 ppm)
– – Install kit (XE) (65-90 ppm)
15 604K55100 HCF Heater kit
16 604K84190 FAR HCF bowl curl kit
17 604K89850 Tray 3 sensor spares kit
NOTE: 497/8K part numbers should not be ordered by the
CSE. 497/8K part numbers are customer install kits and are
for reference only.
Parts Lists
PL 31.14
May 2013
5-138 Xerox® WorkCentre® 5790 Family