Pl 9.22 Xerographic Module And Short Paper Path Assembly (35 Ppm) - Xerox WorkCentre 5790 Family Service Manual

PL 9.22 Xerographic Module and
Short Paper Path Assembly (35 ppm)
Item Part Description
1 122K02650 Erase Lamp (REP 9.9)
2 – Xerographic module (see below for
variants) (NOTE 3)
– 113R00608 Metered (USSG/XCL/XE)
– 113R00607 Sold (XE)
– 113R00610 Sold (USSG/XCL)
3 – Short paper path assembly (REF:
PL 10.25 Item 1)
4 130E10510 Relative humidity sensor (Q09-
365)/Ambient temperature sensor
(Q09-375)
5 960K40570 Temperature sensor (Q09-370)
6 055E54960 Erase lamp support
7 – Xerographic module latch (P/O PL
9.22 Item 18) (REP 9.6)
8 504K12310 Transfer/Detack corotron (NOTE 1)
(ADJ 9.1)
9 113K03330 Transfer/Detack harness (REP 9.8)
10 – Not used
11 – Latch spring (P/O PL 9.22 Item 18)
12 – Latch pin (P/O PL 9.22 Item 18)
13 – Latch plate (Not Spared)
14 031E11102 Developer paddle (REP 9.7)
15 809E69220 Spring
16 802E87941 Pivot plate
17 – Curly clip (Not Spared)
18 604K41120 Developer latch pin kit
19 – Bracket stabiliser (P/O PL 9.22 Item
21)
20 – Stripper finger assembly (P/O PL
9.22 Item 21)
21 604K53940 XRU skids kit
NOTE: 1. A transfer/detack corotron PL 9.22 Item 8 is
supplied with the xerographic module
NOTE: 2. For the charge scorotron and charge scoroton grid
harnesses, refer to PL 4.17.
Parts Lists
PL 9.22
May 2013
5-58 Xerox® WorkCentre® 5790 Family