Operation Flow; Checking The Cable Connection; Checking Network Settings Of This Machine - Konica Minolta bizhub 367 Quick Start Manual

3
3
Checking computer information
% Check the information required for Store Address, and fill out the checklist. For details, refer to
page 3-19.
4
Configuring your computer
% Configure settings to share a computer, or create a dedicated folder to receive files. For details, refer
to page 3-20.
5
Registering destinations
% Register destinations to which files are sent while checking the checklist. For details, refer to
page 3-22.

Operation flow

The following describes a transmission flow. For details, refer to page 3-25.
1
Loading the original
2
Selecting a destination
% Select a registered destination, and check the settings such as the file type and image quality.
3
Press the Start key.
% Press the Start key to scan the original.

Checking the cable connection

Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.

Checking network settings of this machine

Tap [Utility], and select [Device Information]. Then, check that the IP address is displayed.
• For IPv4 environment
3-18
Scan-to-Send function
• For IPv6 environment
3.2
bizhub 367/287/227