Loading Transparencies - Konica Minolta bizhub 367 Quick Start Manual

2
2
Change the paper size setting.
% Select [Paper] - [#] - [Change Tray Setting] - [Paper Size] - [Envelope/4 e 6] ([Envelope/A6 Card]) -
[4 e 6] ([A6 Card]) Selecting [4 e 6] ([A6 Card]) sets [Paper Type] to [Thick3].

Loading transparencies

Up to 20 transparencies can be loaded into the tray.
1
Load paper in the v direction as shown in the figure with the
print side facing down, then align the Lateral Guide to the pa-
per.
% Insert transparencies into the tray until their edges are
pressed against the back.
2
Change the paper type setting.
% Select [Paper] - [#] - [Change Tray Setting] - [Paper Type] - [Transparency].
2-34
Loading paper 2.8
bizhub 367/287/227