Loading Envelopes - Konica Minolta bizhub 367 Quick Start Manual

2.8 Loading paper

Loading envelopes

Up to 10 envelopes can be loaded into the tray.
Image of a long envelope
Image of a Western-style envelope
1
Load envelopes as shown in the figure
with the flap part facing up, then align
the Lateral Guide to them.
% Insert envelopes into the tray until
their edges are pressed against the
back.
% The flap side of envelopes cannot be
printed on.
NOTICE
When loading envelopes into the Bypass Tray, note the following points.
When loading envelopes, remove air
from them, and securely press along the
flap fold line. Otherwise, it will result in
an envelope wrinkle or paper jam.
Do not use envelopes that have glue or release paper on the flaps or the part covered by the flap on the
body.
bizhub 367/287/227
2
2-35