Konica Minolta bizhub 367 Quick Start Manual page 218

5.4 Copy
3
Tap [Paper], select a paper tray to load paper into in order to copy a card, then tap [Close].
% If you specify [Card Shot], you must specify a paper tray other than [Auto].
4
Tap [Application], then select [Card Shot].
5
Tap [ON], then configure each item so that it corresponds with the finishing image.
Settings
[Original Size]
[Layout]
[Zoom]
6
Tap [OK].
7
Press the Start key.
The front side of the card is scanned.
8
Turn the card over, and place it on the Original Glass.
9
Press the Start key.
bizhub 367/287/227
Description
Enter the size of a card to be copied. Alternatively, you can recall the pre-
registered size from [Registered Paper Size].
Select how to arrange the front and back sides of a card on paper.
[Full Size] Copy the card by enlarging it according to the paper size.
[x1.0] Copy the card to the same size as the original (card).
5
5-37