Copy Settings
Change Default Settings
Correct Density
Change Default Settings
You can change the factory default settings about copy. The selected settings are used as the default settings of the copy function.
Changing Default Settings
Number of Copies
1
to 99
Density
-4 to 0
to +4
Auto Density
Original Type
Text
Text/Photo (High Speed)
Text/Photo
Photo
Copy Ratio
Custom Ratio
100% (1:1)
400% (Max)
200%
141% A5->A4
70% A4->A5
50%
25% (Min)
N on 1
Off
2 on 1
4 on 1
ID Card Copy
Select Layout
Collate
Off
On
Sharpness
Seven Levels
Correct Density
Specify the initial copy density. You can also change the copy density temporarily.
-4 to 0 to +4
<Copy Settings>
All the settings about the copy are listed with short descriptions. Default settings are marked with a
dagger ( ).
<Correct Density>
Adjusting Density
Adjust the density
0L40-075