Installing e-Manual
Install the e-Manual on your computer by using the DVD-ROM that comes with the machine.
1
Insert the User Software and Manuals DVD-ROM into the drive on the computer.
Select a language and click [OK] if you are prompted to do so.
If the [Software Programs/Manuals Setup] screen does not appear, remove the DVD-ROM from the drive and insert it again, or
see
Displaying the [Software Programs/Manuals Setup] Screen.
2
Click [Custom Installation].
3
Select [USB Connection], and click [Next].
Select [USB Connection], even if connected using a network.
4
Clear all the check boxes except for [Manuals], and click [Install].
0L40-09W