Display - Canon MF211 Manual

Display

The display shows the screens for copying, scanning, and other functions, as well as the screens for specifying settings for these
functions. You can also check information such as error messages and communication status on the display.
Main Screen
When you press (COPY/SCAN) the main screen for the selected function is displayed. The copy main screen is shown below as
an example.
Basic Copy Operations
Preparing to Use the Machine as a Scanner (MF212w)
<Paper Settings> Screen
When you press (Paper Setting) to select the paper to copy or print on, the <Paper Settings> screen is displayed. Select the
paper on the screen. Also, for example, you can press this key to change the paper settings when you load a paper size that is
different from the previously loaded paper size. Note that the paper setting must be correctly specified so that the paper is fed
properly.
Selecting Paper Tray
Use to select the paper for each tray.
<Select Frequently Used Paper Sizes>
You can set the machine to display only frequently used paper sizes in the selection screen.
<Menu> Screen
When you press , the <Menu> screen is displayed. On this screen, you can start specifying general machine settings such as
<Preferences> or <Timer Settings>, as well as many of the settings for each function, such as copy and scan.
Setting Menu List
<Status Monitor> Screen
When you press , a screen is displayed that enables you to check the status of documents that are being printed or copied, as well
as the status of the machine such as the toner levels or type of loaded paper.
Specifying Paper Size and Type
0L40-00H