Printing Results Are Not Satisfactory - Canon MF211 Manual

Printing Results Are Not Satisfactory

Dirt inside the machine may affect printing results. Perform care and cleaning to the machine first.
Cleaning the Machine
Smudge Marks Appear on the Edge of Printouts
Do you print data without margins?
This symptom occurs if a margin is set to none in the printer driver. A margin of 5 mm or less around the edge of
paper or 10 mm or less around the edge of envelopes is not printable with the machine. Make sure to have margins
around the document to print.
[Finishing] tab
Streaks Appear on Printouts
Are you using appropriate paper?
Check usable paper, and replace with appropriate paper.
Paper
Loading Paper
If using the appropriate paper still does not solve the problem, change one of the <Special Mode Z>, <Special Mode
C>, and <Special Mode D> settings.
Special Processing
To print from a computer, change the setting for [Special Print Adjustment] in the printer driver.
[Mode 1] has the least effect while [Mode 4] has the most effect. Try each in order starting with [Mode 1]. Increasing
the effect makes the print density lighter. Outlines may also be blurred or images may appear somewhat grainy.
Did you just replace the toner cartridge? Have you not used the printer for a long period of time?
Change the setting for <Special Mode B>.
Special Processing
White Streaks Appear
[Advanced Settings] [Expand Print Region and Print] [Off]
0L40-07Y