System Management Settings - Canon MF211 Manual

System Management Settings

NOTE
*
Asterisks ( )
Settings marked with " " are only available for the MF212w. *1
*2
Settings marked with " " have different defaults depending on the country or region of purchase.
Network Settings
System Manager Information Settings
Device Information Settings
Security Settings
Select Country/Region
Remote UI Settings
Auto Online for Remote Scan
Use as USB Device
Enable Product Extended Survey Program
Displ. Consmbls. Info (RUI/Toner Status)
PDL Selection (Plug and Play)
Update Firmware
Initialize System Management Settings
Initialize All Data/Settings
*1
Network Settings
See Network Settings (MF212w).
System Manager Information Settings
Specify the PIN exclusively for Administrators who have access privileges to <Network Settings> and <System Management Settings>.
You can set the PIN from <System Manager PIN>. You can also register the name of an Administrator.
PIN
System Manager PIN
Enter a number of up to seven digits for the System Manager PIN.
System Manager Name
Enter up to 32 alphanumeric characters for the name of an Administrator.
Device Information Settings
Enter up to 32 alphanumeric characters for the name and the installation location to identify the machine.
Device Name
Location
All the settings about System Management Settings are listed with short descriptions. Default settings
are marked with a dagger ( ).
0L40-07A
Setting the System Manager