Service Work On The Engine; Changing The Fuel Screen; Checking The Engine Oil Level - KTM 250 EXC-F Owner's Manual

Hide thumbs Also See for 250 EXC-F:
Table of Contents

Advertisement

18

SERVICE WORK ON THE ENGINE

18.1

Changing the fuel screen

Danger
Fire hazard Fuel is highly flammable.
Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no
fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.
The fuel in the fuel tank expands when warm and may emerge if overfilled. Follow the instructions on refueling.
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
Fuel must not come into contact with the skin, eyes, or clothing. Do not breathe in the fuel vapors. If contact occurs with
the eyes, rinse with water immediately and contact a physician. Immediately clean contaminated areas on the skin with
soap and water. If fuel is swallowed, contact a physician immediately. Change clothing that is contaminated with fuel.
Warning
Environmental hazard Improper handling of fuel is a danger to the environment.
Do not allow fuel to get into the ground water, the ground, or the sewage system.
18.2

Checking the engine oil level

Clean the plug-in connection
Info
Under no circumstances should dirt enter into the fuel line. Dirt in the fuel
line clogs the injection valve.
Disconnect the plug-in connection of the fuel line.
Pull fuel screen
Insert the new fuel screen all the way into the connecting piece.
Lubricate the O-ring and connect plug-in connection of the fuel line.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
Start the engine and check the response.
M01026-10
Preparatory work
Stand the motorcycle upright on a horizontal surface.
Condition
The engine is at operating temperature.
Check the engine oil level.
The engine oil is at a level between the lower edge
level viewer
M00996-10
»
If the engine oil is not up to the lower edge
of the fuel line thoroughly with compressed air.
out of the connecting piece.
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
Info
After switching off the engine, wait one minute before checking the
level.
.
Add engine oil. (
p. 109)
and the middle of the
of the level viewer:
106

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

250 exc-f six days250 xcf-w350 xcf-w six days

Table of Contents