12
SERVICE WORK ON THE CHASSIS
(EXC‑F EU/AU/BR)
–
Position the upper triple clamp with the handlebar.
–
Mount screw
–
Position the clutch line, wiring harness, and voltage regulator. Mount and
tighten screws
Guideline
Remaining screws, chassis
K00089-10
–
Position the fork legs.
Bleeder screws
K00087-11
–
Tighten screws
Guideline
Screw, bottom triple clamp
K00090-10
–
Tighten screw
Guideline
Screw, top steering head
K00091-10
–
Mount and tighten screw
Guideline
Screw, top steering stem
K00092-10
–
Tighten screws
Guideline
Screw, top triple clamp
–
Secure the wiring harness with cable holder
K00090-11
but do not tighten yet.
.
are positioned toward the front.
Info
Grooves are milled into the side of the upper end of the fork legs. The
second milled groove (from the top) must be flush with the top edge of
the upper triple clamp.
.
.
.
M8
.
M6
10 Nm
(7.4 lbf ft)
M8
15 Nm
(11.1 lbf ft)
M20x1.5
12 Nm
(8.9 lbf ft)
17 Nm
Loctite
®
(12.5 lbf ft)
M8
17 Nm
(12.5 lbf ft)
.
55
243™