Toyota 1PZ Repair Manual page 313

CHARGING SYSTEM - Alternator
Socket Wrench
CH0856
SST
SST 09608-20012 (09608-00030)
CH0880
CH0868
3.
CH0199
4.
SST
CH0200
(b) Using a press and socket wrench, press out the front
bearing.
(c) Using SST and a press, press in a new bearing.
(d) Install the bearing retainer with the four screws.
INSPECT REAR BEARING
Check that the bearing is not rough or worn.
IF NECESSARY, REPLACE REAR BEARING
(a) Using SST, remove the bearing cover and bearing.
SST 09820-00021
NOTICE: Be careful not to damage the fan.
CH-15