Toyota 1PZ Repair Manual page 201

FU-62 FUEL SYSTEM - Injection Pump
(b) Hook the return spring to the adjusting lever, and turn
and place the adjusting lever on the governor shaft.
(c) Align the lines of the adjusting lever shaft and adjust-
ing lever.
(d) Install the adjusting lever with the spring guide and
nut.
27. (w/TACHOMETER)
INSTALL PICKUP SENSOR
(a) Install a new O-ring and pickup sensor.
(b) Connect the two lead wires to the connector.
Torque: 210 kg-cm (15 ft-lb, 21 N m )