FUEL SYSTEM - Injection Nozzles (1 HD-T)
(e)
SST 09268-17010
(f)
Set the dial indicator scale to 0 mm (0 in.) on top of
SST 09268-17010
(g) Place the adjusting shim, the capsule sub-assembly
(h) Install SST holes to the straight pins and measure
SST 09268-17010
Dimension f1 (Reference): 4.79 mm (0.1886 in.)
Install SST to the dial indicator so that the protrusion
shown in the illustration is 7.0 mm (0.276 in.) or less.
SST or surface plate.
and straight pins on the nozzle holder body.
dimension £1.
FU-21